The largest Civic Type R club forum

Established in 2002 it brings together people from all over the world to discuss their one love of Type R's.

Here you can brag away boys (and girls)
#3602091
SeanEP3 wrote:looking great!

make sure theres loads of pics!
there'll be lots of pictures don't you worry, our resident professional photographer will be stalking the track
1812_s wrote:didnt realise you had exedy stg 1 before..... how long did the old one last
2 years, fitted at start of march 2011 had about 16,000 miles on it, it's had an easy life too :lol:





#3603016
Car is looking great. Been weighing up whether to go to Grinspeed or TGM to get my brakes and springs goodies fitted. Preston just seems soooo far away from South Wales, but if it's only 3 min 15 really then it's all good :-D

Hope the Llandow run goes/went well. Hope to be there for the next one!
#3603050
WelshyWelsh wrote:Car is looking great. Been weighing up whether to go to Grinspeed or TGM to get my brakes and springs goodies fitted. Preston just seems soooo far away from South Wales, but if it's only 3 min 15 really then it's all good :-D

Hope the Llandow run goes/went well. Hope to be there for the next one!
what goodies are you having fitted? if tuning/gearbox work is not required then RMotion in usk is alot closer for you

Llandow went well, apart from the rain; it dried out midday so I swapped to the semi slicks and had a couple of laps but then after lunch break the heavens opened up and had to swap back (getting soaked while doing it) still, was good fun
#3603064
bondyboy wrote:
WelshyWelsh wrote:Car is looking great. Been weighing up whether to go to Grinspeed or TGM to get my brakes and springs goodies fitted. Preston just seems soooo far away from South Wales, but if it's only 3 min 15 really then it's all good :-D

Hope the Llandow run goes/went well. Hope to be there for the next one!
what goodies are you having fitted? if tuning/gearbox work is not required then RMotion in usk is alot closer for you
Hiya mate, waiting on a few bits but it will be:

Spoon springs
Project Mu front pads
APP brake lines
Spoon calipers

Want to make sure I don't pass these bits over to a bunch of cowboys and heard good things about TGM/Grinspeed. Will have a Google on RMotion.
#3604075
WelshyWelsh wrote:
bondyboy wrote:
WelshyWelsh wrote:Car is looking great. Been weighing up whether to go to Grinspeed or TGM to get my brakes and springs goodies fitted. Preston just seems soooo far away from South Wales, but if it's only 3 min 15 really then it's all good :-D

Hope the Llandow run goes/went well. Hope to be there for the next one!
what goodies are you having fitted? if tuning/gearbox work is not required then RMotion in usk is alot closer for you
Hiya mate, waiting on a few bits but it will be:

Spoon springs
Project Mu front pads
APP brake lines
Spoon calipers

Want to make sure I don't pass these bits over to a bunch of cowboys and heard good things about TGM/Grinspeed. Will have a Google on RMotion.
RMotion would be fine doing that, no need to go so far, Mike at RMotion also runs the VTEC Challenge race series so they know a few things about Hondas
#3604093
While I was up at Grinspeed having my syncros fitted I also asked him to put a MFactory 5.46 Final Drive in there, same price labour so why not? :smile:

I had already used MFactory's gear calculator (http://www.teammfactory.com/gear-calculator) and realised that I probably couldn't live with 4300rpm at 80mph in 6th so researched my options; found that an Accord 03-07 CL9 6th will fit and has a ratio of 0.659 which will return 6th to as near as dammed it oem levels. Bought the required parts from Lings but missed two small parts originally so it couldn't be fitted during my 1st visit to Grinspeed, gutted. It did mean I had to drive the 200 miles home with just the final drive installed; I was right, I couldn't live with it revving so high at motorway speeds, was great that I didn't have to change gear to hit vtec and power was instantly available, but after 3 hours it was doing my nut in!

I ordered the missing parts (collar and bearing needle costing £20!) and had them sent to Stevie, he was able to build up a gearbox and same final drive with the Accord 6th and confirmed it all worked now, great :WOOT

Accord 6th Main and Countershaft
Image

MFactory 5.46 Final Drive (and syncros)
Image

Crown Wheel
Image




If anyone wants to do the same mod with their final drive then the info is below:-

Accord countershaft part number is same regardless of box syncro type, but for the mainshaft there are two part numbers being returned: 23590-RAS-010 & 23590-RAS-A00

Looking to google again regarding the differences I find this thread that refers to the difference between the two mainshafts: http://forums.clubrsx.com/archive/index ... 361275.html

pre TSB
Image

and post TSB
Image

Speaking to Stevie he was able to confirm that Pre TSB = Double cone and Post TSB = single cone syncro type, my ep3 is an early 04 reg and it looks like TSB'd boxes are 05+ so that points to Pre-TSB (dual cone), but Stevie wasn't able to say for sure as mine was built in the transition period and they seemed to have just used what parts were available

If you're running dual cone syncros then you'll need to order pre-tsb mainshaft:-
23590-RAS-A00

but if you think your gearbox would be single cone syncro then the post tsb mainshaft is needed:-
23590-RAS-010

Parts Required

PFKL431117 (23491-RAS-000) GEAR,COUNTER 6TH 1

PFKL432653 (23590-RAS-A00) or 23590-RAS-010 if single cone syncro 05+ boxes GEAR COMP,MAIN 6T 1

PFKL1005139 BRG,NEEDLE 35X41X 1

PFKL434128 COLLAR,DISTANCE 2 1
#3604136
pulpmelon_r wrote:How do you rate the carbon lined syncro's?

5.5fd must be mad, 5.1 feels revvy enough :shock:
Syncros are good, a couple of gears felt a little inconsistent when going in and had some mis selection a couple of times initially but since the new clutch it feels better than oem and no problems

It is pretty mental, feel so much more torque when out of vtec, and when you are giving it some skipping a gear up to calm things down a bit like I would before doesn't have the desired effect :bigthumb:

Sounds immense too, touring car whine like
  • 1
  • 6
  • 7
  • 8
  • 9
  • 10
  • 15
long long title how many chars? lets see 123 ok more? yes 60

We have created lots of YouTube videos just so you can achieve [...]

Another post test yes yes yes or no, maybe ni? :-/

The best flat phpBB theme around. Period. Fine craftmanship and [...]

Do you need a super MOD? Well here it is. chew on this

All you need is right here. Content tag, SEO, listing, Pizza and spaghetti [...]

Lasagna on me this time ok? I got plenty of cash

this should be fantastic. but what about links,images, bbcodes etc etc? [...]