The largest Civic Type R club forum

Established in 2002 it brings together people from all over the world to discuss their one love of Type R's.

Pip's Cream JRSC EP3 302.6 BHP *Fast Car Feature p23*

Here you can brag away boys (and girls)
 Reply
User avatar

Re: Pip's Cream EP3 - Stanced on Volks *JRSC pg14*

By PipHudson
-  Fri Mar 09, 2012 9:50 pm #3260840
fitted my mount inserts today.
Energy Suspension mounts for the Engine and Powerflex for the gearbox mounts.

Image
Image

Some parts form Honda Arrived too. one is a bolt for my cam cover. as one won't come out.
probably going to sheer or cut the bolt. so bought a new one.
also got some small bulbs for the hazard light and rear heated window switches as mine have gone out.
Image

Painted some more parts too.
My slam panel and crash bar.
Image
Image

and fuel rail ready for the JRSC
Image
Image

The Gearbox mount.

Mount Fitting.
Before,
Image

After
Image

Fitted.
Image
Image

Removed the A/C System. :WOOT
Image

and this little bracket. :lol:
Image

started fitting the charger also.
Removed all the intake.

Thats it for today will finish fitting the JRSC tomorrow once i have trimmed down the OEM belt tensioner.
User avatar

Re: Pip's Cream JRSC EP3 Build. Stanced on Volks *Update pg15*

By PipHudson
-  Sat Mar 10, 2012 11:24 pm #3261799
tuf wrote:Just seen it! Looks lovely mate, however imo would look better either in silver or champ white. cool either way :cool:

Cheers. :smile:
Been done before thats why I wanted a different colour.

Arris wrote:talk to me about that bonnet lifter....
Image
[smilie=karls_thumb.gif]
User avatar

JRSC Fitted

By PipHudson
-  Tue Mar 13, 2012 6:34 pm #3263960
Couple of small mod's needed to be done before fitted the Jackson Racing Charger.


This is the OEM Belt tensioner.
Image

and this is it with the modification done needed to use the OEM auto tensioner with the JRSC kit. (Thanks to Carlos for the info)
Image
Image

It also needed Shaving a small amount for metal from near the Intake. for clearance for the charger.
Both pictured here.
Image

The JRSC fitted:
Image
Image

and two short video's
one of my idle withe the BuddyClub Spec4
and one of the bay with the JRSC fitted and running once warm.
Image

Image
Last edited by PipHudson on Tue Mar 13, 2012 8:10 pm, edited 1 time in total.

Re: Pip's Cream JRSC EP3 Build. *JRSC fitted Pic and Vids P15*

By GMballistic
-  Tue Mar 13, 2012 6:51 pm #3263982
bluntcap wrote:Is that an 8psi pulley?
It is the 8psi pulley that Pips got Blunty. :salut:
Discussed on page 13. :wink: [smilie=karls_thumb.gif]


That charger looks so good in place Pip. Getting very jealous now. :mrgreen: :bigthumb:
User avatar

Re: Pip's Cream JRSC EP3 Build. *JRSC fitted Pic and Vids P15*

By bluntcap
-  Tue Mar 13, 2012 7:19 pm #3264021
GMballistic wrote:
bluntcap wrote:Is that an 8psi pulley?
It is the 8psi pulley that Pips got Blunty. :salut:
Discussed on page 13. :wink: [smilie=karls_thumb.gif]


That charger looks so good in place Pip. Getting very jealous now. :mrgreen: :bigthumb:
you mean page 14 :wink:

Re: Pip's Cream JRSC EP3 Build. *JRSC fitted Pic and Vids P15*

By GMballistic
-  Tue Mar 13, 2012 7:24 pm #3264029
bluntcap wrote:
GMballistic wrote:
bluntcap wrote:Is that an 8psi pulley?
It is the 8psi pulley that Pips got Blunty. :salut:
Discussed on page 13. :wink: [smilie=karls_thumb.gif]


That charger looks so good in place Pip. Getting very jealous now. :mrgreen: :bigthumb:
you mean page 14 :wink:
:lol: Yeah, erhh that too. :oops: :lol:
User avatar

Re: Pip's Cream JRSC EP3 Build. *JRSC fitted Pic and Vids P15*

By bluntcap
-  Wed Mar 14, 2012 11:46 pm #3265508
SeanEP3 wrote:ah ok. picked up my jrsc ep today, i have the brace unfitted, and want to get it on, just wondered if anyone had a pic

thanks
Blakmagic had one fitted at one stage......his manifold still cracked, think they are more to try and protect the shaft from snapping, but that is a very rare occurrence.
User avatar

Re: Pip's Cream JRSC EP3 Build. *JRSC fitted Pic and Vids P15*

By Carlos420uk
-  Thu Mar 15, 2012 8:01 am #3265582
bluntcap wrote:
SeanEP3 wrote:have you got the brace for the charger? if so, any pics fitted?
The CPL brace only works with the jackson tensioner, not the OEM one.
I'm pretty sure you can modify the brace to fit with the Auto tensioner if you wanted to. I'm not decided on how useful I actually think it is at the moment personally. Never had any issues without one fitted.

Looking good Pip :cool:
User avatar

Re: Pip's Cream JRSC EP3 Build. *JRSC fitted Pic and Vids P15*

By PipHudson
-  Thu Mar 15, 2012 8:29 pm #3266437
Carlos420uk wrote:
bluntcap wrote:
SeanEP3 wrote:have you got the brace for the charger? if so, any pics fitted?
The CPL brace only works with the jackson tensioner, not the OEM one.
I'm pretty sure you can modify the brace to fit with the Auto tensioner if you wanted to. I'm not decided on how useful I actually think it is at the moment personally. Never had any issues without one fitted.

Looking good Pip :cool:

Cheers Carlos mate.
User avatar

TDi North Tuning

By PipHudson
-  Thu Mar 15, 2012 8:44 pm #3266448
Took the car to TDi North today set off at 6 o'clock and just got back at half 7. Long day!!
anyway. after raising the suspension as the car was to low for the rollers :lol:
and a couple of teething problems, which the guys at TDi sorted no issues [smilie=karls_thumb.gif]
it was on to the rollers.

Image

Image

and a little while later i got the result. . .
302.6 BHP and 197.2 ft/lbs Torque :WOOT :-D
Image

Thanks to all the Guys at TDi North for the work today :-D
User avatar

Re: Pip's Cream JRSC EP3 Build. *JRSC fitted Pic and Vids P15*

By jreedy
-  Thu Mar 15, 2012 8:48 pm #3266452
bluntcap wrote:
SeanEP3 wrote:have you got the brace for the charger? if so, any pics fitted?
The CPL brace only works with the jackson tensioner, not the OEM one.

i had a cpl jrsc support brace fitted with my oem tensioner :wink:

welcome to the 300+ club.............. [smilie=karls_thumb.gif]
 Reply
  • 1
  • 13
  • 14
  • 15
  • 16
  • 17
  • 24
 Return to “This Is What I've Done To My CTR”
long long title how many chars? lets see 123 ok more? yes 60

We have created lots of YouTube videos just so you can achieve [...]

READ MORE
Another post test yes yes yes or no, maybe ni? :-/

The best flat phpBB theme around. Period. Fine craftmanship and [...]

READ MORE
Do you need a super MOD? Well here it is. chew on this

All you need is right here. Content tag, SEO, listing, Pizza and spaghetti [...]

READ MORE
Lasagna on me this time ok? I got plenty of cash

this should be fantastic. but what about links,images, bbcodes etc etc? [...]

READ MORE