The largest Civic Type R club forum

[philly210680]

As long as it's been done properly it should be :thumbup: just keep an eye out for leaks, never had much faith in aftermarket sunroofs personally

have local webasto dealer for services,only £40 :thumbup:

Sorted then

So what plans have you got for it?

Only simple really:-

Tegiwa intake
DC Exhaust
Darker Wheels
Maybe lower it but could not do with a harder ride
Fast Road set up

That's it really,maybe k-pro if i get a pay rise. :thumbup:

[GazEP3]

Fancy one of those Tegiwa intakes myself :thumbup: I'm sanding down a set of standard rims for a respray at the minute, going anthracite, should suit the NHB :cooldude:

[philly210680]

Fancy one of those Tegiwa intakes myself :thumbup: I'm sanding down a set of standard rims for a respray at the minute, going anthracite, should suit the NHB :cooldude:

yeah thinking of doing that myself,do you recon you could just use some filler for the kerbing around the edging? then just sand,prime and spray.

[GazEP3]

Fancy one of those Tegiwa intakes myself :thumbup: I'm sanding down a set of standard rims for a respray at the minute, going anthracite, should suit the NHB :cooldude:

yeah thinking of doing that myself,do you recon you could just use some filler for the kerbing around the edging? then just sand,prime and spray.

Filler works fine as far as I know, there is liquid metal stuff you can get as well though, can't remember the name of it. I'm just using filler on mine on the few chips I have

[philly210680]

Here are some new pic's of my self refurbed wheels,hope you like. :salut:

new blueflame exhaust going on in the week aswell.

[wadkins14]

black on black

needs tyre shine ALL the time though

[Wingnut1878]

was it you who got the exhaust off the bren then? Cars looking well mate, sunroof looks pretty cool too!

[philly210680]

was it you who got the exhaust off the bren then? Cars looking well mate, sunroof looks pretty cool too!

no i've got mine of another member,thanks for the comments,much more to come. :thumbup:

[Wingnut1878]

ah right cool! looking good mate, i went from white OEM's to Black pro race 1.2's best things I did!

but as mentioned plenty of tyre shine will be needed :thumbup:

[RobCTR]

Nice job on the alloys buddy :salut:

[philly210680]

Just a quick update,new blueflame exhaust. :thumbup:

[sdc25]

Did your new exhaust just shart a dog lol
looks good mate!! :thumbup:

[philly210680]

Did your new exhaust just shart a dog lol
looks good mate!! :thumbup:

Yeah mine doesn't give out co2 just little puppies,lol.

[Stevo M81]

What colour did you use for the wheels as am in the process of doing mine black for my satin, and i was just wondering if they were satin black as thats what spray paint i have bought.

[bluntcap]

What colour did you use for the wheels as am in the process of doing mine black for my satin, and i was just wondering if they were satin black as thats what spray paint i have bought.

In the process?? You call what you have done a process

[philly210680]

What colour did you use for the wheels as am in the process of doing mine black for my satin, and i was just wondering if they were satin black as thats what spray paint i have bought.

Gloss black bud,also make sure when you lacquer the wheels make sure you heat the can up so its hot and spray about 6 inches away from the wheel other wise it will go cold mid air and orange peel. :thumbup:

[Stevo M81]

What colour did you use for the wheels as am in the process of doing mine black for my satin, and i was just wondering if they were satin black as thats what spray paint i have bought.

In the process?? You call what you have done a process

Well i have nearly finished the 1st wheel but i am going to get stuck in now and try to do one a week so they will be done, as they are just doing my head in now. And when i say one a wk i mean just sanded

[bluntcap]

What colour did you use for the wheels as am in the process of doing mine black for my satin, and i was just wondering if they were satin black as thats what spray paint i have bought.

In the process?? You call what you have done a process

Well i have nearly finished the 1st wheel but i am going to get stuck in now and try to do one a week so they will be done, as they are just doing my head in now. And when i say one a wk i mean just sanded

You've near finished that 1 wheel for the last 3 months

[Stevo M81]

What colour did you use for the wheels as am in the process of doing mine black for my satin, and i was just wondering if they were satin black as thats what spray paint i have bought.

Gloss black bud,also make sure when you lacquer the wheels make sure you heat the can up so its hot and spray about 6 inches away from the wheel other wise it will go cold mid air and orange peel. :thumbup:

Cheers matey, thats a good tip about the lacquer as wouldnt have done that Was talking to a guy in work and he said best to spray them when its hot and sunny.

[Stevo M81]

What colour did you use for the wheels as am in the process of doing mine black for my satin, and i was just wondering if they were satin black as thats what spray paint i have bought.

In the process?? You call what you have done a process

Well i have nearly finished the 1st wheel but i am going to get stuck in now and try to do one a week so they will be done, as they are just doing my head in now. And when i say one a wk i mean just sanded

You've near finished that 1 wheel for the last 3 months

I know dont remind me, but i have started doing it more quickly and last nite i got 3 sections done in a hr :WOOT now i will be finished end of the wk. (knowing me it will be 6 months for all the wheels lol)