The largest Civic Type R club forum

[LeeH]

Who's going to be at the number one spot, Gonzo with his teg???? Maybe AC, he organised it so he may have a trick up his sleeve or some NOS in the boot

We will find out tomorrow.

[andycole]

Who's going to be at the number one spot, Gonzo with his teg???? Maybe AC, he organised it so he may have a trick up his sleeve or some NOS in the boot

We will find out tomorrow.

Defo not me mate, standard bar the BMC, mrs didnt like the exhaust so it went!!!
See you all later
AC

[gonzo]

Some good results today guys - Cheers andy for organising!

[andycole]

Some good results today guys - Cheers andy for organising!

No probs Steve, have a good time at the ring mate!!!
AC

[andycole]

Dave T 174.5WHP @ 116.8lbs/ft Civic R

Gonzo 172.8WHP @ 121.2lbs/ft Teg R,Amuse Titanium Cat back,Gruppe-M Induction,Supermarket Petrol (no octane boost),32000 miles!!

Mossta 169.0WHP @ 123.0lbs/ft Civic R,Apexi induction kit, B pipe, N1 and of course... Spoon radiator cap

AC 166.9WHP @ 130.9lbs/ft Civic R,BMC CDA and 22000 miles

Sweepuk 165.1WHP @ 118.0lbs/ft Civic R,Tanabe SMR , AEM CAI and 4500 miles

Cheety 160.2WHP @ 105.8lbs/ft Civic R,decat(standard exhaust) and a NAFF cone filter and 30000 miles

Tommyturbo 152.7WHP @ 108.4lbs/ft Civic R

Markyp 149.6WHP @ 106.2lbs/ft Civic R,Standard 10,000 miles

Paul 140.8WHP @ 90.9lbs/ft Civic Coupe

Nezmond 131.0WHP @ 90.3lbs/ft Civic Jordan, BMC CDA and 46000 miles

[Fire_2]

lbs/ft mesured at wheel too?

also what kinda air temp?

shame ya didnt get bhp@rpm

[andycole]

lbs/ft mesured at wheel too?

No idea mate, just the figures from the computer on site!!!
AC 8)

[Sweepuk]

Thanks again Andy

Interesting to see the complete list, would be good to have the persons mods listed too and milage on car.

Mine are Tanabe SMR , AEM CAI and 4500 miles

Gives people considering mods a rough guide.

[andycole]

Thanks again Andy

Interesting to see the complete list, would be good to have the persons mods listed too and milage on car.

Mine are Tanabe SMR , AEM CAI and 4500 miles

Gives people considering mods a rough guide.

Nice one mate, updated above!!
AC

[gonzo]

Me.

Honda Integra DC5 Type-R

Amuse Titanium Cat back
Gruppe-M Induction
Supermarket Petrol (no octane boost)


172.8 BHP
121.2 Torque
@ 7450 Revs

[andycole]

Steve, have you done the calculation back to "flyHP" yet?
How many miles on your motor for interest?
AC

[gonzo]

Steve, have you done the calculation back to "flyHP" yet?
How many miles on your motor for interest?
AC

32000 miles!!

Done 8000 in 7months!! scary!!



Can't find my formula - will search or post for it!!

[Fire_2]

Done 8000 in 7months!! scary!!

pfft i done 8800 since march! and i didnt use it that much to start with as it was snowing

[markyp]

Thanks to andy for organising this event was nice to meet some of the forum and get a few ideas of what to do next.

Someone asked for details on car well mine is totally standard and done just over 10k miles. BUT ive now compiled my new shopping list!

[mossta]

Thanks to andy for organising this event was nice to meet some of the forum and get a few ideas of what to do next.

Someone asked for details on car well mine is totally standard and done just over 10k miles. BUT ive now compiled my new shopping list!

Just got back - that was one heck of a puddle (on the A15?) on the way back - was about to put my goggles on!

Good meet with all new faces - Thanks to Andy & Steve for organising, sorting & measuring.

My mods: Apexi induction kit, B pipe, N1 and of course... Spoon radiator cap

[andycole]

Hope you boys had a good run back!!! Had the stereo off and the window down on the A15, the noise was amazing!!!
Hope to see you all soon
AC

[gonzo]

Not to put a dampner on the results.......BUT.....


Before I put the Gruppe-M on I had 2 rolling road sessions at 2 different places.

1) 178.2 bhp @ wheels
2) 181.4 bhp @ wheels


Today (after fitting gruppe-m) i got 172.8 bhp @ wheels


I dont think that the induction would loose me 6-9bhp!!!

[JonCTR]

Seems a bit low, our South R/R salisbury in June gave a std. 30AE as 160 bhp/wheel, 199 bhp/fly.

Me and Gosneys's made 185 bhp.wheel / 229 bhp fly, and Cragen's 8 psi JRSC made 300bhp fly on the nail.

Jon

[Sweepuk]

Yes it was fun to meet some people

The drive from Sleaford towards Newark was pants Mr Disco man doing 40 odd mph and no options to overtake and pissing rain

Be fun doing the convoy thing when we next meet though.

I suppose the main issue with the dyno numbers is what do they relate to in terms of crank/flywheel figures?. I would hope mine would be around 210 to 215 BHP with my mods.

Tim

[gonzo]

wbhp / 0.82 (thats 18% loss)


I get 210bhp!!

Not right!!!