The largest Civic Type R club forum

[m_kidd]

Guys my car is in having a few parts fitted at the moment 1 of which being avid engine mounts. However upon opening the box there only appears to be 3 mounts, is this correct? Also need a bit of a hand with subframe collars. From what we can see there are 2 thicknesses? Which go's where and from what direction (hopefully explained that well enough).

[CTR-Asch]

With most kits the front mount isnt included. I think because the rear one does the most work anyway.
Which collars do you have?

[m_kidd]

Sorted for the mounts mate.

It's the tegiwa front subframe collars?

[CTR-Asch]

Tegiwa's has four of the same kind and size collars.
Are you sure they are different?

[gobbledygook]

The Tegiwa subframe collars sit between the bolt head and the subframe. If you take one of the front and one of the rear bolts out you will find that the hole in the subframe is a different size front and back. Can't remember which is bigger but they only go one way. They are also an interferance fit over the bolts, so when you first tighten the bolts they slide on and don't come back off again.