- Sun Jul 22, 2007 9:14 pm
#1646853
dieselpower wrote:Agreed this "how to" is incorrect. Could a mod edit the original post please. I wasted my time following this as well. It could be a facelift EP3 change though.Jon C wrote: B: At the point of the arrow you can very carefully pry open this whole panel with a flatface screwdriver, behind this you will also find a number of screws....only loosen the one at the far left. Now the door is free from the screwing part....There are 2 screws you have to take out. It's the 2 that are the furthest into the door. It took me 20 mins to work this out and now I've cracked my door card
Anyone know how much a new door card is???
Apart from that this works a treat. Took me an hour the 1st time, just done it again and it took 3 mins to remove it, clip the door opener back on and refit the card!!!
Rotrex, AP, Quaife, Carbotech Pads - the 4 best mods bar none.